Perlick Ice Maker
Perlick Ice Maker Repair for Bars and Home Bars
A Perlick under-counter ice maker sits in the same kind of spot as the brand's refrigerators: tucked under a bar, ventilating through the front. When it stops, a bar runs out of ice during service, or a home bar runs out the night of a party. We plan business calls around your hours where we can.
Prefer not to call? The form takes about a minute.
Perlick is a Milwaukee maker of beverage, bar and under-counter refrigeration. Its units are stainless and built to be serviced in place, so the repair almost always happens right where the machine is installed.
Water first, machine last
Our order on any ice maker is the water supply and filter first, then the inlet valve, then the parts that make and release ice, and only then the controls. A lot of Perlick ice makers get written off as dead when the supply line is kinked behind the cabinet, the filter is clogged or the drain is backing up.
Columbus-area water is moderately hard. Scale builds on inlet valves, water distribution parts and the freezing surface, which leads to thin or cloudy cubes and slower production. Filtration and regular cleaning are worth more than any part on these machines.
Symptoms and where they point
- No ice at all: water supply off, filter clogged, inlet valve failed, or the machine stopped on a safety.
- Thin, small or hollow cubes: low water flow, scale on the freezing surface or a weak inlet valve.
- Water on the floor: drain line blocked or a drain pump failing on models that pump out.
- Ice melting in the bin faster than usual: a warm room, a blocked front grille or a bin door gasket that no longer seals.
- Bad taste or odor: overdue cleaning and sanitizing, or a spent filter.
Ventilation and the drain
Like Perlick refrigerators, these ice makers breathe through the front. A mat, case of glasses or trim across the grille raises condenser temperature and cuts production, especially in a hot bar. The drain matters as much as the supply: an ice maker has to get rid of melt and purge water constantly, and a slow drain is a common cause of leaks and machine shutdowns.
Keeping it producing
Replace the water filter on schedule, follow the cleaning and sanitizing routine in the manual, keep the front grille clear and check the drain line for kinks. If the machine leaks, keeps making small cubes after a new filter, or will not cycle, book a visit. If the problem turns out to be maintenance rather than a failed part, we say so.
Perlick Ice Maker Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
Scale on the freezing surface or reduced water flow is the usual cause. A cleaning cycle and a new filter often restore normal cubes.
Look at the drain line for kinks or blockage. If it is clear, a drain pump or internal fitting may have failed.
Follow the interval in your manual. In a busy bar with moderately hard water, regular cleaning prevents most production and taste complaints.
Ice Maker problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Ice Maker Repair for Related Brands
Makers that share a platform or a service tier with Perlick