Roper Freezer
When a Roper Freezer Stops Keeping Food Frozen
Most Roper freezers we are called about are the top compartment of a Roper top-freezer refrigerator, though some households have a basic standalone Roper unit as well. Either way the design is simple and shares Whirlpool-family parts, so the repair is usually a matter of finding which of a few components failed.
Prefer not to call? The form takes about a minute.
Here is what tends to go wrong, and what to look at before you book a visit anywhere in the Columbus area.
Signs and likely causes
- Thick frost on the rear panel and food softening: the defrost heater, defrost thermostat or defrost control has failed
- Frost on packages near the door: the gasket is not sealing, or the door is not closing fully
- Freezer warm and the compressor area hot: the condenser fan under the cabinet has stopped
- Fan noise that changes when the door opens: ice is hitting the evaporator fan blade
- Clicking every few minutes with no cooling: the compressor start relay or the compressor itself
The defrost system on a Roper
A frost-free Roper melts frost off its freezer coil several times a day. A timer or control starts the cycle, a heater warms the coil, and a small thermostat clipped to the coil ends the cycle when it is warm enough. If any of the three fails, frost builds until it blocks the airflow. On a top-freezer model, that also starves the fresh-food section below of cold air.
We remove the rear panel, look at the frost pattern and test each part. All three are modest Whirlpool-family parts.
Garage and basement placement
A Roper in an unheated Ohio garage faces a hard job. In summer, the condenser has to shed heat into hot air. In winter, the thermostat in the fresh-food section may rarely call for cooling, and the freezer above warms. Basements are kinder on temperature but add humidity, which adds frost. Leave space around the unit for air and keep the condenser clean.
Repair versus replace
Defrost parts, fans, gaskets and relays are worth fixing on a Roper. A compressor failure or refrigerant leak often is not, because the unit is inexpensive to replace. We will tell you which one you are facing.
Roper Freezer Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
Unplugging it and letting the frost melt will restore cooling for a few days, but frost will return if a defrost part has failed. It is a temporary fix while you arrange a repair.
The defrost drain is probably frozen or clogged. Meltwater cannot reach the drain pan and refreezes inside. Clearing the drain, and sometimes replacing the drain heater or defrost part, fixes it.
Roper is a Whirlpool brand, and its freezers use Whirlpool-family parts. That keeps parts easy to find.
Freezer problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Freezer Repair for Related Brands
Makers that share a platform or a service tier with Roper