Roper Range
Roper Freestanding Range Repair
Roper builds freestanding ranges and keeps them basic: coil or gas burners on top, a single oven below, a storage or broiler drawer at the bottom, and mechanical or simple electronic controls. There are no slide-in trims, convection fans or touch screens to complicate the job.
Prefer not to call? The form takes about a minute.
That is why a Roper range repair is usually quick and modest. Nearly every part is shared with other Whirlpool-family ranges, which makes sourcing easy for homes across central Ohio.
Plug-in burners make diagnosis easy
Roper coil ranges use plug-in elements. If one burner is dead, move its element into a working spot. If it heats there, the element is good and the receptacle or switch behind it has failed. If it stays cold, the element is bad. This simple test saves time and keeps you from paying for parts you do not need.
Oven problems on a Roper range
Electric oven
A visible break or blister on the bake element is the most common cause of no bake heat. If the element looks fine, we test the sensor, the wiring and the control.
Gas oven
Slow or no heat usually means a weak glow-bar igniter. It glows but no longer draws enough current to open the safety valve.
Broiler drawer
On some gas Roper ranges, the broiler sits in the bottom drawer beneath the oven burner. If the oven works but the broiler does not, the broil igniter or burner is the place to look.
Leveling, the anti-tip bracket and the door
A range that is not level cooks unevenly. A range without an anti-tip bracket can tip forward. A door with worn hinges or a torn gasket lets heat escape and makes the oven work harder. We check all three on a Roper range because they are quick to fix and affect how well the range works.
When to call us: Roper range
Call if a burner or the oven will not heat after the simple checks, if the oven runs far off its setting, if a burner will not turn off, or if you smell gas. For gas, leave the home and call the gas utility first. Day or night, someone picks up at (614) 699-4553.
Roper Range Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
Usually yes. On electric ranges, the broil element is a separate part. On gas ranges with a bottom broiler, the broil burner and igniter are separate from the bake side.
Many are. Roper is a Whirlpool brand and uses Whirlpool-family parts. We match each part to your model number.
Elements, igniters, switches and sensors are worth repairing. A failed control on a very old range may not be. We will give you a straight answer.
Range problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Range Repair for Related Brands
Makers that share a platform or a service tier with Roper