Call or book

Washer Repair · Blacklick & Brice

Blacklick and Brice Washer Repair

In most Blacklick subdivision homes, the washer sits in a main-floor laundry room by the garage door. That makes it easy to reach, and it also means a leak lands on finished flooring instead of a basement slab. When a main-floor washer starts dripping, it is worth dealing with right away.

Diagnosed in your homePrice agreed before work startsServing all of Blacklick & Brice
(614) 699-4553

Prefer not to call? The form takes about a minute.

Request a RepairStep 1 of 2
01 The job
02 Your details
Property
01Property
Where
02Where
What needs fixing
03What needs fixing

Prefer to talk? (614) 699-4553

Washer · Blacklick & Brice

Leaks on a finished floor

Leaks on a main-floor machine usually come from the fill hoses, the door boot on a front-loader, the drain pump or the tub seal. Shut off the supply valves behind the washer until it has been checked. Our technician finds the source before suggesting any part, because a loose hose and a torn boot call for very different fixes.

When it will not spin

A washer that stops before spinning is more often a drain or balance problem than a failed motor. If water remains in the tub, the washer will not spin, so we check the drain path and pump first. Then we look at the water supply and inlet valve, and after that the drive system, door lock and suspension.

Builder washers that came with the house may now be at the age where shock absorbers, pumps and door locks start to wear.

Hard water on the main floor

Moderately hard water scales inlet valves over time and leaves residue in boots and filters. The habits above keep that in check.

  • Clean the front-loader's drain pump filter if it has one
  • Open both supply valves all the way and straighten any kinked hose
  • Spread out heavy items like towels and bedding before the spin
  • Use the correct amount of high-efficiency detergent
  • Wipe the door boot and leave the door cracked to dry

Service in 43004 and 43109

We come out by I-270, East Broad Street (SR-16), Reynoldsburg-New Albany Road or Brice Road. Repairs are done in your laundry room, often the same or next day when the schedule allows.

Washer Brands We Fix in Blacklick & Brice

Samsung logo, Samsung appliance repair in ColumbusLG logo, LG appliance repair in ColumbusWhirlpool logo, Whirlpool appliance repair in ColumbusGE Appliances logo, GE Appliances appliance repair in ColumbusMaytag logo, Maytag appliance repair in ColumbusBosch logo, Bosch appliance repair in ColumbusFrigidaire logo, Frigidaire appliance repair in ColumbusKenmore logo, Kenmore appliance repair in ColumbusAmana logo, Amana appliance repair in ColumbusElectrolux logo, Electrolux appliance repair in ColumbusMiele logo, Miele appliance repair in ColumbusAdmiral logo, Admiral appliance repair in ColumbusASKO logo, ASKO appliance repair in ColumbusAvanti logo, Avanti appliance repair in ColumbusBlomberg logo, Blomberg appliance repair in ColumbusFisher & Paykel logo, Fisher & Paykel appliance repair in ColumbusHotpoint logo, Hotpoint appliance repair in ColumbusRoper logo, Roper appliance repair in ColumbusSpeed Queen logo, Speed Queen appliance repair in Columbus

Washer Questions From Blacklick & Brice

Should I replace my washer's rubber fill hoses?
Older rubber hoses can bulge and burst, which is a real risk on a main-floor laundry. If yours are original, have them looked at during any service visit.
The washer bangs loudly during spin. What is wrong?
First try redistributing the load. If banging continues with a balanced load, worn shock absorbers, suspension springs or drum bearings are possible causes, and we will tell you which and whether it is worth fixing.
Can you fix a washer that will not open after the cycle?
Yes. A door that stays locked usually means water remains in the drum or the door lock has failed. We check the drain first, then the lock.

Washer not working in Blacklick & Brice?

The repair is priced after the on-site diagnosis, before any work starts.

CallBook