Call or book
Frigidaire logo

Frigidaire Refrigerator

Frigidaire Refrigerator Repair

A Frigidaire refrigerator that has stopped holding temperature rarely needs anything exotic. The brand builds its fridges around proven, simple refrigeration hardware, and the parts that wear out are the same handful year after year: fan motors, defrost components and the water valve that feeds the ice maker.

Diagnosed in your home before any quotePrice agreed before work startsParts matched to your model numberColumbus and nearby suburbs
(614) 699-4553

Prefer not to call? The form takes about a minute.

Request a RepairStep 1 of 2
01 The job
02 Your details
Property
01Property
Where
02Where
What needs fixing
03What needs fixing

Prefer to talk? (614) 699-4553

On Site
Diagnosis
Upfront
Repair Price
Frigidaire Refrigerator · Columbus, Ohio

That makes a Frigidaire one of the more forgiving refrigerators to own once it starts acting up. We come to homes across Columbus and the surrounding counties, find the specific part that has quit, and tell you plainly whether fixing it makes sense for the age of the unit.

How a Frigidaire keeps food cold

Most Frigidaire refrigerators cool both compartments from a single evaporator coil behind the freezer's rear panel. A fan blows air across that coil into the freezer, and a share of that cold air is pushed through a passage into the fresh-food side. Below the cabinet, a second fan pulls room air across the condenser coil so the compressor can shed heat.

Top-freezer models keep their controls especially basic, often just a dial or two, so a warm fridge on one of these is almost always an airflow or defrost problem rather than a circuit board. Side-by-side and French door models add electronic controls, door dispensers and in some cases an ice maker mounted in the fresh-food door, which brings a few extra failure points.

Symptoms we trace most often

  • Freezer cold, fresh-food side warm: the evaporator fan has stopped or the coil has iced over because a defrost heater, defrost thermostat or defrost control is no longer clearing it.
  • Both sections slowly warming, compressor running hot: a condenser fan that has seized or a coil packed with dust and pet hair under the front grille.
  • Ice maker stopped producing: a fill tube frozen solid at the back of the freezer, usually because a tired water valve or low supply pressure lets water trickle in rather than fill in one clean shot.
  • Water under the crisper drawers: a defrost drain line frozen or clogged, sending meltwater into the fresh-food compartment instead of the drain pan.
  • Clicking every few minutes with no cooling: a compressor start relay or overload struggling to start the compressor.

What our diagnosis looks like

We check condenser airflow and both fans first, then pull the freezer panel to look at the evaporator. A coil coated in solid white frost tells us the defrost circuit is at fault, and we test the heater, thermostat and control to find which one failed. The sealed system comes last.

Frigidaire is the Electrolux group's main mass-market brand in North America, and many of its fans, valves and defrost parts are shared with other Electrolux-built refrigerators. That keeps parts plentiful. We match each one to your model number, and the price is agreed before we start.

Keeping it running in central Ohio

Vacuum the condenser coil behind the lower grille a couple of times a year, more often with shedding pets. Keep food away from the air vents in both compartments so cold air can circulate. If your Frigidaire is a second fridge in a garage, be aware that a hard Ohio winter can leave the space too cold for the thermostat to call for cooling, which lets the freezer warm up even though nothing is broken.

Brands We Work On

Samsung appliance repairLG appliance repairWhirlpool appliance repairGE appliance repairBosch appliance repairMaytag appliance repairKitchenAid appliance repairFrigidaire appliance repairElectrolux appliance repairKenmore appliance repairAmana appliance repairMiele appliance repairSub-Zero appliance repairViking appliance repairThermador appliance repairJennAir appliance repairDacor appliance repairSmeg appliance repairFisher & Paykel appliance repairSharp appliance repairHoshizaki appliance repairTrue appliance repair
FAQ

Frigidaire Refrigerator Repair Questions

Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.

Still have questions?

Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.

Usually not. If the freezer is still cold, the compressor is doing its job. The more likely cause is a stopped evaporator fan or a coil that has frosted over because a defrost part failed, both of which are ordinary repairs.

When the water valve weakens or household pressure drops, water dribbles into the tube and freezes before it reaches the mold. Thawing it only buys time; the lasting fix is restoring proper fill with a new valve, a fresh filter or better supply pressure.

Many components are shared across the Electrolux family, but not every part fits every model. We confirm compatibility against your exact model number rather than assuming.

Refrigerator problems in general

Faults any brand can have, the symptom most often misread, and safe checks to try first

How we work

Diagnosis First, Then One Price

Most Major Brands
Everyday, premium and built-in names, matched to your model number.
Prompt Scheduling
When the schedule allows, often the same or next day.
Price Before Work
You see the quote and say yes before a single part is ordered.
Repair Warranty
90-day parts warranty and 30-day labor warranty

What Happens After You Reach Out

01
Tell Us the Symptom
Use the form or call (614) 699-4553 with the brand and what it is doing
02
Pick a Visit Time
Often same or next day, when the schedule allows
03
Find the Fault
On-site testing, then one clear price for you to approve
04
Repair and Run It
We fix it and run a full cycle before leaving
CallBook