Kenmore Washer
Kenmore Washer Repair for Every Maker Behind the Badge
If your Kenmore washer is a top-loader from the 1990s or 2000s, there is a good chance Whirlpool built it, and that is good news. Those machines, especially the belt-drive and direct-drive models with model numbers starting in 110, are some of the easiest washers ever made to keep running, and Columbus basements are full of them.
Prefer not to call? The form takes about a minute.
Newer Kenmore and Kenmore Elite front-loaders are a different story. Some came from Whirlpool, some from LG with a 796 prefix, and some from Electrolux with 417. Each one carries its maker's design and codes, and we repair it accordingly.
Whirlpool-built Kenmore top-loaders
These machines fail in predictable, mechanical ways, and the parts are inexpensive and widely stocked because they are shared with Whirlpool, Roper and other Whirlpool-family washers.
- Fills and drains but will not agitate or spin: on belt-drive models the belt or clutch, on direct-drive models the motor coupling between motor and transmission
- Will not spin with the lid closed: a lid switch that no longer makes contact
- Agitator moves but clothes do not turn over: worn agitator dogs in the upper section of a dual-action agitator
- Leaks under the machine: a pump or a hose clamp, more often than a tub seal
LG and Electrolux-built front-loaders
A Kenmore front-loader with a 796 prefix behaves like an LG, with a direct-drive motor and LG's alphanumeric codes. One with a 417 prefix is an Electrolux, with its own drain pump design and fault codes. In both cases the door boot collects water and mildew, the drain pump filter collects coins and lint, and worn tub bearings eventually announce themselves with a roar during spin.
Because the electronics come from the original manufacturer, we follow that manufacturer's test procedure. The Kenmore badge does not change how the washer is diagnosed.
Keeping a Kenmore washer going
Replace rubber fill hoses with braided ones if yours are original; a burst hose in a finished basement does real damage. Do not overload an older top-loader with heavy comforters, which strains the drive. On a front-loader, leave the door open between washes and use only high-efficiency detergent, since moderately hard water and extra soap together leave residue in the boot and drain.
Kenmore Washer Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
Usually not. On direct-drive models the plastic and rubber coupler between the motor and transmission is designed to break first and protect the motor. It is a common, affordable repair.
Look at the label under the lid or on the back panel. The three digits before the period tell you: 110 is Whirlpool, 796 is LG and 417 is Electrolux. A photo of that label helps us bring the right parts.
A loud roar that rises with drum speed is usually the tub bearings, which is a major repair on any front-loader. We will compare that cost honestly with a new washer before you decide.
Washer problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Washer Repair for Related Brands
Makers that share a platform or a service tier with Kenmore