Roper Washer
Roper Washer Repair for Top-Load Machines
A Roper washer is a basic top-loader from Whirlpool's value line. It does not have a lot of electronics, and that keeps most repairs quick and affordable. Two problems account for a large share of the calls we get: a washer that will not run once the lid is down, and one that hums without spinning.
Prefer not to call? The form takes about a minute.
Both point to small, inexpensive Whirlpool-family parts, and we carry the common ones when we come out to homes across Columbus and the nearby counties.
Will not run or spin with the lid closed
The lid switch, or on newer machines the lid lock assembly, tells the washer the lid is shut. Older Roper washers use a plastic actuator on the lid that presses a switch under the top. If that actuator breaks or the switch wears out, the washer fills and maybe agitates, then refuses to spin. Newer models lock the lid during spin, and if the lock cannot confirm it is engaged, the washer stops and may flash its lights. In either case the part is modest and the test is quick.
Humming without spinning
On older direct-drive Roper washers, the motor connects to the transmission through a small coupler made of two plastic halves and a rubber disc. When a heavy or unbalanced load jams the drum, the coupler breaks to protect the motor. You hear the motor running, but nothing turns. Replacing the coupler is routine.
If the coupler is intact, a drain pump jammed with a sock or coin can stop the washer from draining, which in turn stops it from spinning. We check the pump before assuming the drive has failed.
Other Roper washer issues
- Leaking from underneath: the pump, a hose clamp or the drain hose connection
- Slow fill: inlet screens clogged with mineral deposits from moderately hard central Ohio water
- Loud banging in spin: overloading, an uneven floor, or worn suspension parts
- Clothes not getting clean: overloading, or worn agitator dogs on dual-action agitators
Keeping it going
Do not overload a Roper with bulky bedding. Spread heavy items evenly. Clean the inlet screens where the hoses connect every year or two. Check that the washer sits level and does not rock on the floor. And if a repair would cost close to the price of a new Roper, we will say so.
Roper Washer Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
Press the lid firmly and listen for a click. If the lid switch actuator is broken or the switch has failed, the washer will not spin. It is one of the most common Roper repairs.
Lid switches, couplers, pumps and valves almost always are. A failed transmission or tub bearing on an older unit is often a closer call against the cost of a new machine.
Roper shares parts with other Whirlpool-family washers, so the common ones are easy to get. We match them to your model number.
Washer problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Washer Repair for Related Brands
Makers that share a platform or a service tier with Roper