Call or book
Dishwasher

Measuring the Opening for a New Dishwasher

The standard dishwasher opening size, how to measure height when floors have been redone, and what corners, stone counters and old kitchens add to the plan.

TrueFix Columbus4 min read

Most American kitchens use the same nominal dishwasher size, so replacements usually go smoothly. The ones that do not are almost always caused by something that changed after the first dishwasher went in: new flooring, a thicker countertop, a cabinet that shifted, or a corner that was always tight.

The standard size

Full-size built-in dishwashers are designed for a cabinet opening of roughly:

  • •Width: 24 inches. Manuals often list a minimum just at or slightly above 24 inches.
  • •Height: about 34 to 35 inches, measured from the finished floor to the underside of the countertop. Leveling legs give a range of adjustment.
  • •Depth: about 24 inches from the front edge of the cabinet frame to the back wall.

Compact models designed for an 18-inch opening use the same height and depth with a narrower width.

Exact minimums and maximums vary by model, and some tall-tub or premium designs have tighter height ranges. The installation manual and the dimension sheet for your specific model are the only figures to trust.

Measuring properly

  1. Width at the top and bottom. Cabinets drift. Use the smaller number.
  2. Height at the front and at the back. Floors are rarely perfectly level under a counter, and older homes have more variation. The back measurement catches a floor that slopes toward the wall.
  3. Depth to the wall, minus obstacles. Pipes, a valve or an outlet in the back of the space can keep the dishwasher from sliding all the way in.
  4. Path for hoses and the cord. The sink cabinet wall needs an opening so the supply line, drain hose and cord can pass through.

When the floor is the problem

Here is the situation we hear about most: a kitchen gets new tile or hardwood, laid up to and around the old dishwasher. Years later, the old machine is trapped because the opening is now shorter than it was. Getting it out may mean removing the countertop fasteners, lowering the legs fully, or in some cases lifting the counter slightly.

If you are planning a floor project, run the new flooring under the dishwasher space, or at least protect the opening height.

Countertops and mounting

Dishwashers are secured at the top or sides so they do not tip forward when the loaded door is opened.

  • •Wood, laminate and solid surface tops usually take top-mount brackets screwed into the underside.
  • •Granite, quartz and other stone cannot take screws. Most dishwashers include side-mount brackets that fasten into the adjacent cabinets instead. Some installers use a mounting kit made for stone.
  • •A thicker new countertop reduces the height of the opening. Measure after the counter goes in, not before.

Corners and door clearance

A dishwasher installed near a corner needs room for its door to open fully without hitting the drawer pulls or handles on the perpendicular cabinet. Manuals often recommend a minimum distance from the side of the dishwasher to the corner. If cabinet hardware sticks out, the gap needs to be larger. Also check that the open door will not block a drawer you use while loading.

Older kitchen quirks

In older Columbus homes, particularly ones with kitchens remodeled several times, we see openings that are slightly narrow, cabinets that were never anchored, and supply valves placed where the dishwasher's rear panel now sits. None of these are unusual, but they are easier to sort out before delivery day than after.

What else to line up before install

  • •A hot water supply with a working shutoff valve under the sink. For temperature guidance, see what water temperature a dishwasher needs.
  • •A correctly routed drain with a high loop or air gap.
  • •The right electrical connection: plug-in or hardwired, depending on the model and the house.

After the swap

If a newly installed dishwasher will not sit level, rocks when the door opens, leaks at the front or drains poorly, the cause is usually in the installation rather than the machine. Our dishwasher repair technicians can check leveling, mounting and connections and explain any fix before starting. Call us or book online if you need help.

Want a Technician to Look at It?

We diagnose in your Columbus-area home and agree on the price before any repair begins.

More From Our Blog

CallBook