Dacor Stove
Dacor Pro-Style Stove Repair
On a Dacor professional-style stove, the cooktop is where most of the daily work happens: heavy grates, sealed high-output burners, and on wider models a griddle or grill section. This page focuses on that surface, the part of a Dacor most owners touch every day and the part that most often needs attention.
Prefer not to call? The form takes about a minute.
For the full range, including the oven cavity and dual-fuel issues, see our Dacor range page. Here we stay on the burners.
Ignition and reignition
Many Dacor burners automatically spark again if their flame goes out, which is reassuring on a busy cooktop but sensitive to moisture and debris. A wet igniter or a cap set slightly off center will keep a burner clicking while lit. Clean, dry and reseat first. If the problem continues, the spark module or a switch on the valve stem may be failing, often after a spill ran down behind the knob.
A burner that will not light at all, while its neighbors do, points to a clogged burner head, a cracked igniter or a wiring connection to that burner.
Flame quality
- Yellow or lazy flames: blocked ports, a misaligned cap, or an air shutter needing adjustment.
- Flame lifting off the burner: ports clogged on one side or the cap not seated.
- Simmer flame blowing out: low-setting adjustment on the valve, or ports partially blocked.
- Uneven heat across a griddle: debris under the plate or a burner beneath it not burning evenly.
Grease, hoods and knobs
High-output burners send a lot of grease into the air. If the hood above is undersized or the filters are saturated, that grease settles back onto the knobs, valve stems and igniters. Knobs get sticky, switches start to misread, and igniters weaken. Cleaning hood filters regularly protects the stove as much as the ceiling.
Many custom kitchens around Columbus, including newer homes in Dublin and New Albany, have these stoves under big hoods, and the hood is often part of the diagnosis.
Parts and repairs
Dacor is Samsung's luxury appliance line, and has been owned by Samsung since 2016. Burner valves, igniters, spark modules, griddle parts and knobs are routine Dacor repairs. We match each part to your model and serial number and explain the work and price before we begin. If you smell gas, turn off the burners, leave the home and call the gas utility from outside before calling us.
Dacor Stove Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
The reignition system is not detecting the flame, usually because the igniter is damp or dirty or the cap is off center. If cleaning and drying do not stop it, the spark module or valve switch needs testing.
Let them cool, remove them, wash with warm soapy water and a soft brush, and dry completely before refitting. Use a pin, not a toothpick, to clear ports so nothing breaks off inside.
Often. Debris under the plate, a partially blocked burner or an igniter issue are common causes. We inspect the burner beneath the griddle and its flame pattern.
Stove problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Stove Repair for Related Brands
Makers that share a platform or a service tier with Dacor