Thermador Stove
Thermador Stove Repair for Professional-Style Kitchens
When someone in central Ohio says their Thermador stove is acting up, they usually mean a professional-style unit: stainless, heavy knobs, star burners up top and a convection oven below. It is the centerpiece of the kitchen, and when it is down, cooking stops.
Prefer not to call? The form takes about a minute.
We start with what you see and hear, then work from the burners downward, testing each part before anything is ordered.
Burners First
Most Thermador stove calls start on top. A burner that clicks and will not light usually has a wet igniter or a cap shifted off its base after cleaning. Dry it fully, seat the cap so it sits flat, and try again. A burner that goes out and comes back at the lowest setting is the ExtraLow simmer feature cycling on purpose, which is normal.
If a burner still will not light or stay lit after drying and cleaning, we test the igniter, the spark module and the burner valve. Because each burner has its own igniter and valve, a fault on one rarely means the others are at risk.
Then the Oven
A gas oven that heats slowly may have an igniter that still glows but no longer opens the gas valve fully. An oven that bakes unevenly on convection points toward the convection fan or its heat source. Off-temperature complaints get a check of the door gasket and hinges before the sensor, because a door that does not seal lets heat escape.
What to Note Before the Visit
- Which burner or which oven cavity has the problem.
- Whether the issue happens at all settings or only low or high.
- Any message on the display and what you were doing when it appeared.
- Whether you smelled gas. If you do, leave the house and call the gas utility from outside.
Moving a Heavy Stove
Professional-style stoves are heavy and fit tightly between counters. When one has to come forward, we protect the floor and counter edges, shut off the gas, and leak-check every connection before we leave. Thermador is the luxury brand of BSH, which also makes Bosch and Gaggenau, and we match parts to the rating label on your stove so the right component arrives.
Thermador Stove Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
Yes. That is ExtraLow simmer cycling the flame on purpose. If it happens at higher settings, call us.
On gas models, a weakening igniter is the usual cause. It glows but no longer opens the valve properly. A current reading tells us what the glow cannot.
Only when the repair requires it. We protect your floor and counters, and on gas models we leak-check every fitting after reconnecting.
Stove problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Stove Repair for Related Brands
Makers that share a platform or a service tier with Thermador