Kenmore Stove
Fixing the Kenmore Stove You Have Relied on for Years
Plenty of people in Columbus are cooking on a Kenmore stove that came with the house. It works, mostly, and they would rather fix it than shop for a new one. That is often the right call. Most Kenmore stoves were built by Electrolux and share parts with Frigidaire stoves of the same era, which means burner parts, igniters, elements and switches are generally still easy to find.
Prefer not to call? The form takes about a minute.
Here is how we sort out a Kenmore stove problem.
Is the trouble on top or in the oven?
A stove is really two appliances in one cabinet. Surface burners and oven heat run through different parts, so a stove with a dead oven but working burners points to the oven's igniter, element or sensor rather than the power supply. A stove with nothing working at all points to power: the breaker, the gas supply, or the power cord terminal at the back.
Common Kenmore stove faults
- Gas burner clicking with no flame: wet or dirty igniter, cap out of position, or blocked ports
- Gas oven slow to heat or not lighting: a weak igniter that glows but no longer opens the oven valve
- Coil element dead in one position: swap elements to tell a bad element from a burnt receptacle or a bad switch
- Electric oven heats from the top only: the bake element on the oven floor has failed
- Oven far off temperature: the sensor probe or a worn door gasket
- Knobs that spin freely: a stripped knob or a worn valve or switch stem
Older Kenmore stoves and safety
Older Kenmore gas stoves may still use standing pilot lights on the oven or cooktop. If a pilot keeps going out, a draft or a dirty pilot orifice is usually why. Relight it only by following the instructions printed on the stove, and if you smell gas, leave the house and call the gas utility from outside.
Check that your stove has an anti-tip bracket at the rear foot. Older installations often skipped it. We look for one on every visit because a stove that tips forward with a heavy pot on top is a serious hazard.
Repair or replace: Kenmore stove
Burners, igniters, elements, switches and knobs are almost always worth fixing on a Kenmore stove. A failed electronic control on an older model can be a closer call, and we will give you an honest view before you spend anything.
Kenmore Stove Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
Look along the frame behind the storage drawer or broiler drawer, or on the edge of the oven opening when the door is open. Send us a photo and we will confirm the maker.
The burner is not getting enough air, usually because the ports or the air shutter are blocked by debris. Clean it thoroughly. If the flame stays yellow or soots the pan, have it checked.
If your Kenmore has a 790 prefix, many parts are the same as the matching Frigidaire model. We always confirm by the exact model number before installing anything.
Stove problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Stove Repair for Related Brands
Makers that share a platform or a service tier with Kenmore