Roper Stove
Roper Stove Repair for Homes and Rentals
Roper stoves are common in rentals, apartments and first homes around Columbus because they are reliable, simple and inexpensive. When one stops working, a landlord or tenant usually wants a clear answer quickly: what is broken, and is it worth fixing?
Prefer not to call? The form takes about a minute.
Most of the time the answer is a single part, and yes. Roper stoves use Whirlpool-family parts, and their basic design means fewer things go wrong.
Sorting the problem
First, decide whether the trouble is on the stovetop, in the oven, or both. If everything is dead, check the breaker or the gas supply. If only one burner fails, the cause is local to that burner. If the oven fails but the burners work, look at the oven igniter, bake element or sensor.
Electric Roper stoves
- Dead coil burner: plug the element into a working spot; if it heats there, the receptacle or switch has failed
- Burner stuck on high: the infinite switch has failed
- Oven heats only from the top: the bake element is burned out
- Clock works but nothing heats: one side of the 240-volt circuit may have tripped
Gas Roper stoves
A clicking burner that will not light is usually wet or dirty. Let it dry and clean the ports. A gas oven that is slow to heat usually has a weak igniter. A burner with a yellow, lazy flame needs cleaning or an air shutter adjustment.
If you smell gas, do not turn anything on or off. Leave the home and call the gas utility from outside.
Simple habits that prevent repeat calls
Most repeat problems on a Roper stove come from spills and heat. Clean the drip bowls under coil burners before grease builds up, and never line them with foil, which traps heat against the receptacle. Push coil elements fully into their receptacles so the terminals make solid contact. On gas models, wipe boil-overs once the burner cools so food does not harden in the ports. Tenants should know to report a burner that sparks, smells hot or runs on high by itself instead of working around it.
For landlords and property managers
The technician explains what failed and why, which helps when you are keeping track of repairs across several units. If a stove is old enough that a repair is not sensible, we tell you that plainly. We also check that the anti-tip bracket is installed, which is a common gap in rental kitchens.
Roper Stove Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
The infinite switch behind that knob is failing. It controls the power on lower settings. Replacing the switch fixes the problem.
Usually. Burners, switches, igniters and elements are inexpensive. A failed control on an older unit may be the exception, and we will give you an honest comparison.
It is a bracket on the floor or wall that holds a rear foot of the stove. It keeps the stove from tipping forward if weight is put on the open oven door. Every freestanding stove should have one.
Stove problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Stove Repair for Related Brands
Makers that share a platform or a service tier with Roper