Amana Cooktop
Amana Cooktop Repair for Radiant Glass and Gas Burners
Amana cooktops, whether built into a countertop or forming the top of an Amana range, use plain, proven parts: radiant ribbon elements under glass controlled by infinite switches, or sealed gas burners lit by a spark module. There is very little electronics to go wrong, so faults are usually one switch, one element or one igniter.
Prefer not to call? The form takes about a minute.
Columbus kitchens have both gas and electric Amana cooktops, and we confirm which one you have when you book.
Radiant electric problems
An element will not heat
Check the breaker first. If the other elements work, the dead one is either open or not getting power from its switch. Radiant elements sometimes show a visible break in the coil under the glass when lit.
An element stays on high
An infinite switch whose contacts have stuck closed will keep feeding full power. Turn off the breaker and do not use that burner until the switch is replaced.
The hot-surface light will not go out
The limiter or indicator circuit has failed. It is a warning-light fault, but it is worth fixing so you can tell when the glass is hot.
Gas burner problems
A burner that clicks without lighting is usually wet, greasy or has a cap out of place. Let it dry fully, seat the cap flat and clear the ports with a pin. Clicking that continues after everything is dry points to a spark switch. A yellow or lifting flame suggests blocked ports or a misaligned burner head. If you smell gas, turn off the burners, leave the house and call the gas utility.
Caring for an Amana cooktop
Use a cooktop cream on glass and a flat razor scraper for burnt-on spills, and avoid sliding heavy cast iron across the surface. On gas models, clean the caps and grates without flooding the burner base. A sugary spill on hot glass should be lifted promptly, because it can pit the surface as it cools.
When to bring us in
Book a visit if a burner still will not light after drying and cleaning, an element will not heat or will not turn off, or the glass is cracked. A cracked top is replaced as one piece. Since Amana uses Whirlpool-family parts, switches, elements and igniters are generally on hand quickly, and we will tell you honestly if the repair is out of proportion to the cooktop's value.
Amana Cooktop Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
The infinite switch for that burner has most likely failed with its contacts closed. Turn off the breaker and have the switch replaced before using it again.
Probably not. Water in the igniter area is the usual cause. Leave the caps off and let it air dry for several hours.
No. The glass top is replaced. Using a cracked radiant cooktop is unsafe because spills can reach the elements and wiring.
Current Amana cooktops use Whirlpool-family parts, which helps with availability. We confirm the part from the model number.
Cooktop problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Cooktop Repair for Related Brands
Makers that share a platform or a service tier with Amana