GE Appliances Cooktop
GE Cooktop Repair in the Columbus Area
GE builds gas, radiant electric and induction cooktops, and the same complaint means something different on each. A dead zone on induction is an electronics question. A dead burner on gas is usually about ignition and cleanliness. We confirm which GE design you have before we arrive.
Prefer not to call? The form takes about a minute.
Since GE keeps its own engineering and parts catalog across GE, Profile, Cafe and Monogram, the model number on the underside of the cooktop, or on its tag, leads to the exact replacement parts.
Gas GE cooktops
A burner that clicks and will not light is the single most common gas cooktop call. On a GE sealed burner, the usual causes are a wet igniter after a boil-over, food packed into the burner ports, or a cap sitting slightly off its base. Let it dry for a few hours, clear the ports with a pin and seat the cap flat. If it still will not light, the igniter, spark module or valve gets tested.
Clicking that will not stop even with the knob off often traces to moisture in a switch or a failing spark module.
Radiant smoothtops
When a GE radiant element stays on full no matter where the knob is set, the infinite switch or the control relay has usually failed closed. An element that does not heat at all may have an open element or a failed switch. Do not keep using a cracked glass top, because spills can reach live parts beneath it.
Induction: GE Appliances cooktop
GE induction cooktops sense the pan before they heat. A zone that blinks and will not start is often reacting to cookware that is not magnetic or is too small for the zone. Plenty of Columbus households switch to induction and keep a favorite aluminum or copper pan, which simply will not register. If proper cookware still fails, we look at the induction module and its cooling fan, because overheating electronics will shut zones down.
When to call: GE Appliances cooktop
- A gas burner that will not light after drying and cleaning.
- An element that will not shut off or will not heat.
- Cracked glass on a radiant or induction top.
- Any smell of gas, in which case leave the house and call the gas utility first.
GE Appliances Cooktop Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
Water got into the igniter or switch. It often stops once everything dries. If it continues after a full day, the switch or spark module needs testing.
Hold a magnet to the bottom of the pan. If it does not stick firmly, the cooktop will not recognize it. Also make sure the pan base covers most of the zone.
The glass top can usually be replaced as a part, matched to your model number. Stop using it until then.
Cooktop problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Cooktop Repair for Related Brands
Makers that share a platform or a service tier with GE Appliances