Smeg Cooktop
Smeg Gas and Induction Cooktop Repair
Smeg cooktops come in gas, induction and electric versions, with European styling and knobs or touch controls depending on the model. The gas versions behave in one way that surprises many American owners, and it explains a large share of the service calls we see.
Prefer not to call? The form takes about a minute.
Columbus-area kitchens have every kind of cooktop, so we confirm your type and model before the visit.
The burner that goes out when you let go
Most Smeg gas burners have a flame-failure safety device: a small thermocouple beside the flame that has to warm up before the gas valve will stay open on its own. You push the knob in, light the burner and hold it for a few seconds. Let go too soon and the flame goes out. That is normal behavior.
If the burner still goes out after holding the knob for longer, the thermocouple may be dirty, bent away from the flame or failing. We clean and test it, then check the valve. Bypassing this safety device is never an option.
Gas burners that click but will not light
Moisture after cleaning, food in the burner ports or a cap that is not seated flat causes most ignition failures. Let the burner dry completely, clean the ports with a pin and set the cap and crown back carefully. Smeg burner parts must line up precisely to light well. If it still will not light, we test the spark electrode and ignition module. Every gas connection we touch is leak-checked.
Induction and electric zones
- Zone will not start: check that the pan base is magnetic; a fridge magnet should stick
- Zone shuts off during cooking: overheating protection, often from blocked ventilation beneath the cooktop
- Touch controls unresponsive: moisture or residue on the glass, or a control board fault
- Element stuck on or off on radiant models: the element or its control
Glass and long-term care
Clean the glass with a proper cooktop cleaner and a scraper made for glass. Avoid sliding heavy cast iron across the surface. A cracked top should not be used. Replacement glass comes from Smeg's own catalog, and we confirm availability before you decide.
Smeg Cooktop Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
The flame-failure thermocouple needs a few seconds of heat. Hold the knob in longer; if it still goes out, the thermocouple needs cleaning or replacement.
No. It is an essential safety system that stops gas flowing if the flame goes out.
Usually overheating protection. Check that the cabinet below has proper ventilation; if it does, the fan or electronics need testing.
Usually the burner crown is not seated exactly, or its ports are blocked after a spill. Clean it, dry it and reseat it carefully. A cracked or warped crown needs replacement.
Cooktop problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Cooktop Repair for Related Brands
Makers that share a platform or a service tier with Smeg