La Cornue Cooktop
La Cornue Burner and Cooktop Repair
The cooktop on a La Cornue is built to take daily, heavy cooking. Depending on the configuration, it can include open burners, a high-output burner, a French simmer plate, a griddle or a plancha. Each section has its own valve and its own way of failing, and La Cornue designed all of them to be repaired rather than replaced.
Prefer not to call? The form takes about a minute.
Here is how we handle La Cornue cooktop problems in Columbus-area kitchens.
Burners that will not light or stay lit: La Cornue cooktop
On a burner that will not light, the igniter, the spark module and the burner head are checked first. Food and liquid in the burner head or on the electrode can stop the spark from reaching the gas. On a burner that lights and then goes out when you let go of the knob, the flame safety device is the usual cause. It senses the flame and holds the gas valve open; if it is dirty, worn or not sitting in the flame, it lets the valve close.
We clean, test and adjust before replacing anything. These are routine parts on a La Cornue.
The French top and griddle
A French simmer plate spreads heat from a central burner across a thick plate, so the center runs hottest and the edges cooler. If the whole plate no longer heats properly, the burner underneath, its valve or its igniter may be at fault. A griddle or plancha that heats unevenly can have a partially blocked burner. We check the burner and valve under each section separately.
Valves and knobs
La Cornue valves are built to be serviced. A knob that turns stiffly, a valve that does not hold a low flame, or a burner that runs too high may need valve service or replacement. Brass knobs and trim should never be forced, and we treat the finish carefully.
Care for a La Cornue cooktop
- Let burners and grates cool before cleaning
- Keep burner heads and ports clear of food and grease
- Dry spills under burners promptly to protect the igniters
- Avoid harsh abrasives on brass, chrome and enamel finishes
La Cornue Cooktop Repair Questions
Straight answers to what Columbus homeowners usually ask before booking. If your question is not here, send it with your booking request and we will answer it.
Still have questions?
Reach us by phone or book online. We cover Columbus and nearby communities in Franklin, Delaware, Fairfield, Licking, Union, Madison and Pickaway counties.
The flame safety device is not holding the gas valve open. It may need cleaning, adjustment or replacement. It is a routine repair.
Yes. A French top is designed to be hottest at the center and cooler toward the edges, so you can move pans to adjust heat.
Usually. Most burner, igniter and valve repairs are done from the top or front. We plan carefully if the range needs to be moved.
Cooktop problems in general
Faults any brand can have, the symptom most often misread, and safe checks to try first
Cooktop Repair for Related Brands
Makers that share a platform or a service tier with La Cornue